The ASMPT 03057850 (2007) is an essential tool for high-volume SMT lines where Components Per Hour (CPH) is the primary metric. Optimized for the SIPLACE CP20 PowerHead, the 2007 nozzle series is engineered to handle the intense mechanical stress of 24/7 high-speed operation. Its defining feature is a Low-Profile Cone Geometry, which reduces the air volume inside the nozzle tip. This allows the vacuum system to achieve "Peak Holding Pressure" significantly faster than standard nozzles, enabling the placement head to move to the next coordinate the micro-second the component is secured.
GEEKVALUE provides the 03057850 with a focus on Structural Resonance Management. In the ultra-high-speed environment of the SIPLACE TX series, nozzle vibration can lead to "skewed picking." Our 2007 nozzles are built with a Monolithic Shaft-to-Tip Bond, ensuring that the nozzle behaves as a single rigid body, eliminating micro-wobbles during $5\text{G}$ gantry acceleration.
Technical Specifications
Feature | Technical Data |
Product Type | Ultra-High-Speed Micro Nozzle |
Part Number (P/N) | 03057850 |
Nozzle Series | 2007 |
Compatible Head | SIPLACE CP20 (PowerHead) / CP12 Series |
Tip Material | Advanced Wear-Resistant Composite with ESD Coating |
Application Range | 0201 (Inch), 0402 (Inch), and Miniature Passives |
Identification | Integrated Precision Mechanical Recognition Rings |
Strategic Performance Advantages
· "Instant-Break" Vacuum Release: The 2007 nozzle features an internal Pneumatic Bypass Architecture. When the machine switches from vacuum to blow-off, this design ensures the air pressure equalizes instantly, preventing the "Vacuum Drag" that can cause components to be pulled back up or shifted during the placement stroke.
· Component Edge Protection: The 03057850 tip is designed with a Micro-Radiused Contact Face. Unlike sharp-edged nozzles that can chip the fragile ceramic body of 0201 capacitors, the 2007 distributes the suction force evenly, ensuring zero mechanical damage even at high placement forces.
· Optimized Vision Recognition Surface: GEEKVALUE uses a proprietary Light-Absorbing Matte Finish on the 2007 nozzle body. This ensures that the SIPLACE vision system (WPC/SVP) gets a perfectly clean silhouette of the component, allowing for sub-micron alignment corrections in real-time.
· Self-Lubricating Internal Bore: The vacuum channel of the 03057850 is treated to be Dust-Repellent. This prevents the accumulation of paper-tape fibers and solder balls inside the nozzle, maintaining a consistent airflow $(Q)$ and extending the time between maintenance cycles.
The GEEKVALUE Advantage: "Driving CPH Efficiency"
1. 360° Total Cost Optimization (TCO)
In high-speed placement, a "No-Pick" rate increase of even 0.01% can lead to thousands of dollars in lost components. GEEKVALUE optimizes your TCO by providing 03057850 Nozzles with Certified Flow-Rate Consistency. We ensure every nozzle in your kit performs identically, eliminating the need for machine re-calibration after a nozzle change.
2. Trusted by 400+ Public Companies
Global leaders in high-speed smartphone assembly and medical device electronics trust GEEKVALUE for their placement execution. Our 2007 nozzles are the standard choice for listed companies that require "Maximum Yield at Maximum Speed" for their most demanding production schedules.
3. Optimized Interface Integrity
GEEKVALUE’s 03057850 nozzles are inspected for Interface Hardness. We ensure the docking area that connects to the CP20 spindle is resistant to deformation, maintaining a perfect airtight seal over millions of pickup cycles and preventing vacuum leakage that degrades machine performance.
Frequently Asked Questions (FAQ)
Q1: Is the 2007 nozzle (03057850) compatible with the SIPLACE SX series?
Yes. It is fully compatible with the CP20 head used in the SX, TX, and X series machines.
Q2: How does the 2007 differ from the 2034 nozzle?
The 2007 (03057850) is specifically tuned for smaller 0201 (inch) components with a focus on faster vacuum response, whereas the 2034 is a more general-purpose nozzle for 0402 and larger passives.
Q3: Does this nozzle require special cleaning fluids?
GEEKVALUE recommends standard ESD-safe ultrasonic cleaning. However, due to its precision bore, we suggest a filtered drying process to ensure no moisture is trapped in the micro-vacuum channel.
Q4: How does GEEKVALUE ensure the ESD safety of the 2007 series?
We perform Surface Resistivity Mapping on every batch. We guarantee that the nozzle tip maintains a dissipative rating ($10^6$ to $10^9\text{ ohms}$) to prevent static discharge from damaging sensitive micro-circuits.