GEEKVALUE supplies ASM SMT nozzles, pick-and-place nozzles, nozzle holders, special nozzles, and nozzle-related spare parts for SMT factories that need accurate pickup, stable vacuum, lower mis-pick rate, and reliable production performance.
The SMT nozzle is the contact point between the pick-and-place machine and the component. Even a small amount of nozzle wear, clogging, deformation, vacuum leakage, or incorrect tip size can cause pickup failure, component drop, placement offset, and repeated machine alarms.
For ASM SIPLACE machines, the correct nozzle should be selected according to machine model, nozzle part number, component package, component size, vacuum requirement, material sensitivity, and production speed.
Different components require different nozzle structures, tip sizes, vacuum holes, materials, and pickup surfaces. We help customers select practical nozzle options based on machine model and production application.
Commonly used ASM SMT nozzles for standard chip components, ICs, capacitors, resistors, LEDs, and general SMT placement needs.
Special nozzle options for irregular components, delicate parts, special packages, large components, or uncommon pickup surfaces.
Nozzle holders, adapters, mounting-related parts, and accessories used around the pickup and placement system.
Nozzles selected for smaller components, high-density boards, and applications requiring stable pickup and accurate placement.
Nozzle options for larger components requiring stronger vacuum support, wider contact surface, or special pickup balance.
Nozzle options for sensitive electronic components where material selection and safe handling are important.
Browse current nozzle products in this category. You can also send us your nozzle part number, machine model, old nozzle photo, or component package information for matching support.
The ASM 03102344 is a high-performance ceramic-tipped nozzle designed for the SIPLACE TX, SX, and X-series high-speed pl...
Send part number, machine model, old nozzle photo or component package.
Wrong nozzle selection may lead to vacuum leakage, component drop, pickup failure, offset placement, or component damage. We help customers confirm the right nozzle based on machine, part number, component package, and pickup requirements.
ASM SIPLACE platform, placement head type, and nozzle interface requirement.
Use OEM number, nozzle label, old nozzle photo, or existing nozzle marking for matching.
Confirm component size, weight, surface, shape, material sensitivity, and pickup area.
Standard nozzle, special nozzle, bulk purchase, replacement nozzle, or nozzle accessory.
Nozzle selection is not only about part number. A stable nozzle choice should consider pickup surface, vacuum hole, material, tip size, component height, and placement speed.
Small chips, ICs, LEDs, connectors, and large parts may require different nozzle shapes and pickup areas.
The vacuum hole should match component size and pickup stability without damaging the component.
Worn, chipped, blocked, or deformed tips can cause unstable pickup and placement deviation.
Flat, uneven, sensitive, reflective, or irregular component surfaces may require special nozzle design.
The nozzle must match ASM machine platform, placement head, mounting interface, and recognition requirement.
For high-volume production, repeated nozzle purchase and preventive replacement planning are important.
Many SMT placement problems are related to nozzle wear, clogging, poor vacuum, wrong nozzle selection, or component mismatch. We help customers identify whether the problem may require nozzle replacement, cleaning, matching, or a different nozzle type.
Ask Nozzle SupportNozzle cannot pick up components consistently because of wrong size, weak vacuum, clogging, or damaged tip.
Components drop during movement due to insufficient vacuum holding force or unsuitable nozzle contact surface.
Leakage may come from worn nozzle tip, damaged holder, poor sealing, or incorrect nozzle installation.
Dust, solder paste residue, or contamination may block the vacuum hole and reduce pickup stability.
Worn or incorrect nozzle may cause unstable pickup position and placement deviation.
Wrong nozzle material, size, or contact pressure may damage delicate or sensitive components.
SMT nozzles are small parts, but their condition directly affects production yield. Before supply, we focus on model accuracy, appearance condition, pickup interface, and practical application requirement.
Check requested nozzle code, machine model, and replacement requirement.
Check for visible wear, damage, deformation, or contamination where applicable.
Confirm the nozzle hole and pickup structure are suitable for the intended application.
Nozzles are packed to protect tips, surfaces, and precision areas during shipment.
Different customers need different nozzle support. We help factories with routine replacement, urgent shortage, special component production, and repeated purchase planning.
Common nozzle models for regular SMT production and routine replacement.
Support for irregular components, special packages, sensitive parts, and specific pickup conditions.
For factories and distributors requiring repeated purchase and preventive stock.
Support for selected nozzle holders, adapters, and pickup-related accessories where available.
Send your ASM machine model, nozzle number, old nozzle photo, or component package. We will help check suitable options quickly.
Nozzle purchasing is not only about finding a small part. The right supplier should help reduce wrong model selection, pickup instability, repeated production issues, and urgent shortage risk.
If you are not sure about the correct nozzle, send us the part number, machine model, old nozzle photo, or component package. Our team will help check suitable options.
Ask Nozzle ExpertYes. We supply ASM SMT nozzles, pick-and-place nozzles, special nozzles, nozzle holders, and selected nozzle-related accessories.
You can send the nozzle part number, old nozzle photo, machine model, placement head information, or component package details.
Yes. Send the component size, shape, surface condition, package type, and production requirement. We can help check suitable nozzle options.
Yes. Worn, clogged, damaged, or incorrect nozzles can cause pickup failure, component drop, vacuum leakage, and placement deviation.
Yes. We can support bulk purchase for common nozzle models, production consumables, and preventive replacement stock.
Yes. We support global delivery by express, air freight, or other suitable logistics methods depending on the order and destination.
