Telecommunication and 5G
High-density boards and demanding component mixes for communication infrastructure and network equipment.
HIGH-VOLUME ASM SIPLACE PLACEMENT PLATFORM
ASM SIPLACE X S / XS Series SMT Placement Machines
Explore SIPLACE X-Series S placement machines for demanding high-volume SMT production. Compare X4S, X3S and X2S configurations, placement capacity, head combinations, feeder support and available equipment.
X4S, X3S and X2S machine configurations
High-volume and high-precision placement
Two, three or four placement gantries
Large-PCB and dual-lane production options
SIPLACE X-Series S
Machine & Configuration Support
X4S · X3S · X2SFour · Three · Two Gantries
Up to 150,000 CPHHigh-Volume Placement
Up to 160 Feeder SlotsComplex Material Setups
Up to 25 µm AccuracyConfiguration Dependent
Available Equipment
Available SIPLACE X S Machine Models
Browse the X4S, X3S and X2S machines published under this series. The installed placement heads, conveyor configuration, software, machine condition and included accessories should be confirmed for each unit.
High-Volume Performance
Three X S Configurations for Different Capacity Targets
SIPLACE X4S, X3S and X2S share the same high-volume platform concept while providing different gantry counts and placement capacities. The final production result also depends on the installed heads, component mix, PCB transport and line balance.
SIPLACE X4S
150,000 CPH
Four-gantry configuration for maximum platform capacity.
SIPLACE X3S
112,500 CPH
Three-gantry configuration for high-output production.
SIPLACE X2S
75,000 CPH
Two-gantry configuration for scalable volume production.
Material Capacity
Up to 160
Feeder slots for broad and complex production setups.
Platform Overview
Understanding the SIPLACE X-Series S Platform
The X S platform is intended for demanding volume production where placement output, precision, process reliability, feeder capacity and large-board handling must be evaluated together.
Selecting an X4S, X3S or X2S Machine
The main difference between SIPLACE X4S, X3S and X2S is the number of placement gantries. X4S provides four gantries, X3S provides three, and X2S provides two. The required model should be selected according to actual line capacity and product requirements rather than model name alone.
Machines with the same X S model designation may have different placement-head combinations, conveyor arrangements, software versions and installed process options. The machine label and actual configuration should therefore be reviewed before a quotation is confirmed.
Information to Confirm Before Selection
- Required X4S, X3S or X2S machine configuration
- Installed placement-head type on each gantry
- Single-lane, dual-lane or flexible dual-lane conveyor
- PCB dimensions, thickness and weight
- Smallest, largest and odd-shaped components
- Required feeder quantity and tape widths
- Software version and line communication requirements
- Machine condition, manufacturing year and destination
Model Comparison
SIPLACE X4S, X3S and X2S Comparison
The models share the same platform concept but provide different gantry counts and placement capacities. Actual performance and capability depend on the installed machine configuration.
| Machine Model | Gantry Configuration | Placement Speed | Placement Accuracy | Production Positioning | Supply Status |
|---|---|---|---|---|---|
| SIPLACE X4S | Four placement gantries | Up to 150,000 cph | Up to 25 µm | Maximum-capacity high-volume SMT production | Contact for availability |
| SIPLACE X3S | Three placement gantries | Up to 112,500 cph | Up to 25 µm | High-output production with balanced capacity | Contact for availability |
| SIPLACE X2S | Two placement gantries | Up to 75,000 cph | Up to 25 µm | Scalable high-quality volume production | Contact for availability |
Production Capabilities
Where SIPLACE X S Machines Deliver the Most Value
The platform is positioned for demanding electronics manufacturing where high placement capacity, precise process control and continuous material supply are important.
IT and Server Hardware
Complex computing, server and networking boards with large component counts and continuous output requirements.
High-Volume Electronics
Production environments where placement capacity, uptime, material supply and consistent yield are critical.
Large and Complex PCBs
Applications requiring conveyor review, large-board handling and precise warpage compensation processes.
Placement Heads and Parts
Head, Feeder and Spare-Parts Support for SIPLACE X S
The actual component range and output depend heavily on the installed head combination. Machine labels, head types and original part numbers should be checked before matching replacement components.
SIPLACE X FeedersFeeder units and feeder replacement parts
CP20 Placement HeadsHigh-speed head modules and service parts
CPP Placement HeadsFlexible placement-head components
TWIN Placement HeadsLarge and odd-shaped component handling
ASM SMT NozzlesStandard and special pickup nozzles
More X S Spare PartsMotors, boards, sensors, cameras and cables
Supply Process
From X S Model Selection to Delivery
High-volume equipment should be verified by complete machine configuration rather than model designation alone.
Production Review
Confirm target output, PCB dimensions, component range, feeder requirements and existing line conditions.
Model Selection
Compare X4S, X3S and X2S capacity and identify the required gantry and placement-head configuration.
Machine Verification
Review labels, installed heads, conveyor arrangement, software information, photos and available test details.
Packing and Delivery
Confirm included equipment, feeder packages, export packing, shipment details and destination requirements.
Frequently Asked Questions
SIPLACE X S Machine Questions
Common information about X4S, X3S and X2S machines, placement heads, feeders, configurations and supply options.
SIPLACE X S and X-Series S are the official platform expressions. In customer searches and supplier records, the platform is also commonly written as SIPLACE XS.
The primary difference is the number of placement gantries and the resulting nominal placement capacity. X4S uses four gantries, X3S uses three and X2S uses two.
Used and refurbished equipment may be available according to current inventory. Machine condition, installed heads, conveyor configuration and included accessories must be confirmed individually.
Available machine labels, photos, installed-head information, software details and inspection information can be reviewed according to the individual unit.
Feeder packages depend on the quotation. Machines may be supplied separately or matched with compatible SIPLACE X feeders according to tape width and production setup.
Feeders, placement heads, nozzles, motors, boards, sensors, cameras, cables and other replacement parts can be matched using the machine model and original part number.
Please provide the required model, target output, PCB dimensions, component range, head configuration, feeder requirement, preferred equipment condition and destination country.
Need Help Selecting an X4S, X3S or X2S Machine?
Send your required production output, PCB size, component range, placement-head configuration, feeder requirement and destination country for machine matching.