The SIPLACE CP20P (03091157) is a premium, 20-spindle rotary head designed for the ultra-high-speed assembly of miniature components. As part of the "P" (Performance) series, this head features upgraded materials and refined mechanical tolerances compared to standard CP20 models. It is the ideal workhorse for high-volume SMT lines where speed, thermal stability, and repeatable accuracy are the primary KPIs.
At GEEKVALUE, we supply the P/N 03091157 with a focus on Operational Continuity. We ensure that every head is verified for "Zero-Drop" performance, allowing your line to run at peak CPH (Chips Per Hour) even with the most challenging ultra-miniature components.
Technical Specifications
Feature | Technical Data |
Product Model | SIPLACE CP20P (Performance Series) |
Part Number (P/N) | 03091157 |
Nozzle Count | 20 Independent Spindles |
Component Range | 01005 (metric) up to 6 x 6 mm |
Placement Speed | Optimized for Maximum Gantry Acceleration |
Accuracy | Enhanced Micron-Level Precision |
Compatibility | SIPLACE X-Series, SX-Series (P-Configured) |
Distinctive Performance Advantages
· P-Series Thermal Stability: The 03091157 is built to resist thermal expansion during high-speed, long-shift operations. This ensures that placement accuracy does not drift as the head temperature rises, a critical factor for 01005 and high-density PCBA.
· Reduced Friction Architecture: The internal spindle assembly in the CP20P uses advanced coatings that reduce friction. This results in less heat generation and a significantly longer MTBF (Mean Time Between Failures) than standard placement heads.
· High-Frequency Pick-Up Success: Optimized vacuum paths within the 03091157 allow for faster vacuum build-up and release. This minimizes "pick-up" delays and ensures that components are held securely even at the extreme G-forces of the X-Y gantry.
· Wear-Resistant Star Drive: The rotary star drive is reinforced to maintain timing accuracy over millions of cycles, ensuring that nozzle rotation and alignment remain crisp and predictable.
The GEEKVALUE Advantage: "360° Smart Manufacturing"
1. Total Cost Optimization (TCO)
The CP20P is an investment in throughput. GEEKVALUE optimizes your TCO by providing 03091157 units that require less frequent recalibration. By using higher-grade wear parts, we help you lower your "Cost Per Placement," directly impacting your factory's bottom line.
2. Global Quality Standards for 400+ Public Companies
Managing high-speed lines for global leaders requires a "No-Failure" mindset. GEEKVALUE’s rigorous testing for the CP20P includes high-speed cycle simulation and vacuum integrity audits, ensuring our P/N 03091157 meets the standards of the world’s most demanding EMS providers.
3. Invisible Personalization & Expert Support
We don't just sell the P/N 03058420 or the 03091157; we understand which head fits your specific production mix. Our engineers can provide the technical data needed to integrate the CP20P into your current "Smart Factory" environment for seamless data tracking and performance monitoring.
Frequently Asked Questions (FAQ)
Q1: What makes the "P" in CP20P (03091157) so important?
A: The "P" stands for Performance. It indicates upgraded internal components that provide better accuracy and durability during high-speed operation. If your line runs 24/7 at maximum speed, the 03091157 is designed to handle that stress better than a standard head.
Q2: Does GEEKVALUE verify the accuracy of each spindle on the CP20P?
A: Yes. We use automated vision inspection systems to verify the concentricity and vertical alignment of all 20 spindles. This ensures that every nozzle position on the P/N 03091157 provides the same high-level placement yield.
Q3: Can I replace a standard CP20 with this CP20P 03091157?
A: In most cases, yes. The CP20P is designed to be compatible with SIPLACE X and SX platforms. However, GEEKVALUE will help you check your machine's software and gantry parameters to ensure full performance optimization.
Q4: How do I maintain the CP20P to ensure its long life?
A: Maintenance is key for the 03091157. We recommend regular vacuum filter changes and the use of ASM-specified lubricants. GEEKVALUE can provide the exact maintenance kits required for this specific part number.
Q5: How does GEEKVALUE ship such a high-precision component?
A: We use ESD-safe, shock-absorbent specialized packaging. For the CP20P, we often include "Handle with Care" monitoring to ensure the head's delicate rotary sensors are protected during international transit.