The Hover-Davis 12/16mm Electric Feeder for the Siemens SIPLACE platform is a high-flexibility module designed to bridge the gap between high-speed chip shooting and large-scale component placement. This dual-range feeder is the industry standard for delivering mid-sized components such as SOT-223 packages, medium power inductors, and aluminum electrolytic capacitors. By allowing a single feeder chassis to accommodate both 12mm and 16mm carrier tapes, Hover-Davis provides SMT manufacturers with a modular asset that can be reconfigured in seconds, ensuring your feeder fleet remains lean and highly adaptable to changing board designs.
GEEKVALUE provides the Hover-Davis 12/16mm feeder with a focus on Tension Consistency. We recognize that 12mm and 16mm tapes often carry heavier components that require higher inertia control; our feeders are verified for high-torque indexing to ensure the carrier tape remains taut and the component stays centered at every pick-up.
Technical Specifications
Feature | Technical Data |
Product Type | Dual-Width Adaptive Electric Feeder |
Tape Width Compatibility | 12mm and 16mm (Adjustable) |
Compatibility | SIPLACE X, SX, and D-Series Platforms |
Drive Architecture | High-Torque Digital Stepping Motor |
Indexing Resolution | 0.05mm Micro-Stepping Accuracy |
Peeling System | Synchronized Electronic Take-up Drive |
Strategic Performance Advantages
· Rapid Bandwidth Conversion: The 12/16mm feeder features a precision-adjustable tape guide system. This allows operators to switch between 12mm and 16mm widths without swapping the entire feeder unit, significantly reducing the "Setup Time" and the capital investment required for specialized feeder inventory.
· Adaptive Torque Peeling: Cover tapes for 12/16mm reels require higher peeling force than 8mm tapes. This feeder utilizes an adaptive electronic peeling system that senses tape resistance, ensuring a smooth, snag-free removal of the cover tape even for "Deep-Pocket" components that exert high downward pressure.
· Intelligent Pitch Detection: The Hover-Davis digital interface automatically communicates the programmed pitch to the SIPLACE OS. Whether the component requires a 4mm, 8mm, or 12mm advance, the micro-stepping motor executes the movement with sub-millisecond precision, maintaining a high FPY (First-Pass Yield).
· Anti-Static Shielded Path: Designed for high-reliability sectors, the feeder’s tape path is entirely ESD-safe. This prevents static buildup on the plastic carrier tape, which is critical for protecting the delicate ICs and semiconductors typically found in 12/16mm packaging from latent electrostatic discharge.
The GEEKVALUE Advantage: "Versatility Without Latency"
1. 360° Total Cost Optimization (TCO)
For many manufacturers, buying separate 12mm and 16mm feeders results in idle assets. GEEKVALUE optimizes your TCO by providing 12/16mm Hover-Davis Feeders that serve a Dual Purpose. By consolidating two tape widths into one high-performance chassis, we help you maximize your "Feeder-to-Slot" ratio and lower your total cost of ownership.
2. Trusted by 400+ Public Companies
Global leaders in medical device and industrial control manufacturing trust GEEKVALUE for their mid-range feeding requirements. Our 12/16mm feeders are the standard spare for listed companies that require "Zero-Drift" accuracy when placing high-reliability components onto critical-mission PCBA.
3. Industry 4.0 Traceability Integration
Despite its dual-width nature, the feeder remains a fully intelligent node. GEEKVALUE’s 12/16mm units ensure that component-ID and tape-width settings are seamlessly synchronized with your SIPLACE Setup Assistant, providing the digital transparency needed for automated changeovers and real-time material tracking.
Frequently Asked Questions (FAQ)
Q1: How difficult is it to switch from 12mm to 16mm width?
A: It is a manual but extremely fast adjustment. The 12/16mm Hover-Davis is designed for "Tool-less" or minimal-tool conversion, allowing an operator to adjust the tape guides and peeling system in under two minutes at the setup station.
Q2: Is this feeder compatible with the SIPLACE SX Series "Smart" Trolleys?
A: Yes. The 12/16mm Hover-Davis is fully compatible with the X/SX-Series intelligent bus. It is recognized as a digital feeder and powered through the standard docking interface.
Q3: How does GEEKVALUE verify the quality of a dual-width feeder?
A: Every unit undergoes a Multi-Width Load Test. We verify the indexing accuracy and peeling tension for both 12mm and 16mm tapes using weighted dummies to ensure the motor and gear train perform perfectly at both specifications.
Q4: Can this feeder handle "Deep-Pocket" 16mm tapes?
A: Yes, the feeder is specifically engineered with a high-clearance tape path to accommodate the deeper pockets found in power inductors and tall electrolytic capacitors commonly found in 16mm formats.