The ASM 00141088 belongs to the specialized SL (Silver-Line / Standard-Light) series of SIPLACE intelligent feeders. Designed for the high-volume consumer electronics sector, this triple-lane 8mm feeder is engineered to provide the maximum possible component density for SIPLACE X and SX platforms. The 00141088 allows for the simultaneous feeding of three independent 8mm carrier tapes, effectively turning a single feeder slot into a high-speed material hub. Its SL-series architecture focuses on mechanical reliability and weight optimization, making it the preferred choice for operators handling high-frequency kitting and trolley changeovers.
GEEKVALUE provides the P/N 00141088 with a focus on Operational Agility. We understand that in a 24/7 SMT environment, the ease of handling a triple-lane feeder directly impacts changeover speed; our SL-series feeders are verified for smooth docking and rapid reel-loading, ensuring your line stays in motion.
Technical Specifications
Feature | Technical Data |
Product Type | SIPLACE SL-Series (Silver-Line) Triple-Lane Feeder |
Part Number (P/N) | 00141088 |
Lane Configuration | 3 x 8mm Independent Tracks |
Compatibility | SIPLACE X, SX, D, and C-Series Platforms |
Drive Technology | Triple-Independent Digital Micro-Stepping |
Component Range | 0201, 0402, 0603, to 0805 (Metric 0603 to 2012) |
Strategic Performance Advantages
· Triple-Track Logistics Efficiency: The 00141088 enables the machine to access three unique part numbers within the width of a single feeder slot. This is critical for boards with high bill-of-materials (BOM) counts, allowing you to maximize the "Component frontage" available to the placement heads without adding extra machine modules.
· SL-Series Ergonomic Engineering: The "SL" designation signifies an optimized weight-to-performance ratio. By utilizing high-strength, lightweight alloys in the chassis, the 00141088 reduces the physical strain on operators during mass feeder changeovers, which is a key factor in maintaining long-term factory safety and efficiency.
· Independent Pitch Programming: Each of the three lanes can be programmed for different feeding pitches (e.g., 2mm for 0201s or 4mm for 0603s). This allows for a "Mixed-Load" on a single feeder unit, providing the flexibility needed for high-mix production on a high-speed line.
· Simplified Maintenance Path: The 00141088 is designed with a "Service-Friendly" internal layout. Compared to more complex specialized feeders, the SL-series offers easier access to the tape guides and peeling mechanisms, reducing the Mean Time To Repair (MTTR) and lowering your annual maintenance costs.
The GEEKVALUE Advantage: "High Density, Low Overhead"
1. 360° Total Cost Optimization (TCO)
For high-volume manufacturers, the cost per feeder slot is a critical KPI. GEEKVALUE optimizes your TCO by providing 00141088 SL-Feeders that have undergone Synchronous Performance Audits. By utilizing triple-lane feeders, you drastically reduce the number of machine modules and feeder carts required, leading to a direct reduction in capital expenditure and floor space requirements.
2. Trusted by 400+ Public Companies
Global leaders in high-speed assembly—from LED drivers to smart home appliances—trust GEEKVALUE for their ASM SL-series infrastructure. Our 00141088 feeders are the workhorse for listed companies that prioritize "Stable Throughput" and "Ease of Operation" in their global manufacturing hubs.
3. Industry 4.0 Seamless Integration
The 00141088 is a fully intelligent "X-Feeder" compatible module. GEEKVALUE’s units ensure that the built-in memory correctly stores component count and feeder calibration data, enabling your SIPLACE software to perform real-time consumption tracking and "Low Material" alerts with 100% data integrity.
Frequently Asked Questions (FAQ)
Q1: What is the main difference between the 00141088 (SL) and the 00141098 (Silver)?
A: While both are triple-lane feeders, the 00141088 (SL) is optimized for standard high-volume production with an emphasis on weight reduction and cost-effective maintenance. It is the ideal "Standard-Line" workhorse for 0201 to 0805 components.
Q2: Can I use this feeder on older SIPLACE D-Series machines?
A: Yes, the 00141088 is compatible with SIPLACE D-Series gantry systems as long as the machine is equipped with the appropriate X-Feeder interface and software version.
Q3: How does GEEKVALUE verify the "Peeling Consistency" of Lane C?
A: Every feeder undergoes a Tri-Lane Stress Test. We monitor the cover-tape take-up torque of all three lanes—A, B, and C—simultaneously to ensure that even at maximum speed, there is no tape snapping or tension variation between the inner and outer tracks.
Q4: Is the docking connector durable enough for daily changeovers?
A: Absolutely. The 00141088 features the standard ASM gold-plated 12-pin interface, designed for thousands of docking cycles. We inspect every pin for perfect alignment to prevent communication errors during "Hot-Swaps."
Q5: What is the packaging standard for shipping?
A: We use Class-0 ESD and Shock-Absorbent Industrial Packaging. Every 00141088 is vacuum-sealed in an anti-static bag and nestled in a custom-contoured foam crate to ensure it arrives at your facility in "Factory-Fresh" calibration.